Aerospace Technician

A) Engine Technicians

• Perform disassembling and assembling of engine while adhering to technical and quality specifications.
• Perform overhauling on the engine
• Perform repairing type of aircraft engine parts such as parts in the intake,compressor, combustion and exhaust sections
• Perform repair on aircraft engine high pressure compressor blades (HPC Blade) and Land Marine blades
• Perform welding and aircraft engine compressor blades and land marine blades
• Perform profiling of cold section compressor air-foils
• Perform removal and replacement of air filter
• Perform removal and replacement of engine pipelines
• Perform non-destructive testing on engine parts
• Perform engine propeller change and engine run up as per maintenance manual

B) A&C Line/ Base

• Conducts daily routine pre-flight inspection including servicing prior to aircraft departure.
• Performed daily and weekly Transit checks of aircraft including repair/ rectification if necessary.
• Review the cabin maintenance logbook and Aircraft maintenance logbook and rectify minor defect or malfunction recorded by flight/ cabin crew and maintain records of all actions taken. Ensure general working condition and security of all cabin equipment including serviceability of all emergency and demo equipment.
• Accomplishment of customer's aircraft's maintenance checks, check, inspection, repair, modification, and testing safety, demonstration, emergency and loose equipment, removal/ installation, repair, overhaul, modification, and refurbishment of all aircraft seats.
• Carry out maintenance and functional checks of cabin equipment and associated components in accordance with the company's standard procedures, manuals, and manufacturer's specification to ensure its serviceability condition and attachment security for passenger's comfort and safety. (e.g. - main wheel assembly, tyres, brake assembly, passenger seats, side bin, overhead bins, sidewall, ceiling panels, carpets, seat covers, passenger and cockpit windows etc.)
• Base Maintenance are designed to repair, overhaul and testing facilities for aircraft such as B747, B737, B777 and A330, A340, A319/ 320 but are not limited to perform and preparation servicing such as A, C, EQ, S1 and S2 check with the applicable AMMs while observing the airline Safety and Quality procedures.

C) Cabin

• Perform the task of cleaning aircraft interior and exterior during periodic overhauls.
• Tasks includes removing and cleaning carpets, wiping windows, changing curtains, removing waste from seats, cleaning lights, changing & moving passenger seats, cleaning electrical equipment, maintaining and repairing airplane cabins, maintaining entertainment and lighting systems, performing laboratory cleaning and replenishing activities, performing floor vacuuming, cleaning seat pockets, luggage storage area, etc.
• Changes lighting systems and repairing entertainment systems, seat electrical systems, etc.
• Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance.
• Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads.
• Flexible and possesses the willingness and ability to work for long hours and on weekends.
• Ability to perform the given tasks in high noise areas and at great heights (with PPEs)
• Maintenance and repairing of aircraft cabins.
• Maintain, repair and restore cargo compartments and its components.
• Maintain inventory items required for handling the cleaning activities.
• Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain the quality of the aircraft interiors on the operated fleet.
• Maintain the interior and exterior cleaning standards on the operate fleet.

D) Sheetmetal

• Perform minor and major maintenance checks, such as removal and installation of access panels, inspection of areas prone to corrosion
• Perform sheet metal structure repair work and alteration of damage aircraft in accordance with work specifications of structure repair manual (SRM), component maintenance manual (CMM), or any engineering authorizations and manufacturer specifications to return aircraft serviceable and airworthy condition.
• Perform minor and major maintenance checks, such as removal and installation of access panels, inspection of areas prone to corrosion
• Perform sheet metal structure repair work and alteration of damage aircraft in accordance with work specifications of structure repair manual (SRM), component maintenance manual (CMM), or any engineering authorizations and manufacturer specifications to return aircraft serviceable and airworthy condition.
• Replace or make repairs to skins and structural component of aircraft as required using appropriate technical orders, blueprints drawings and tools.

E) Avionics

• Maintenance and servicing of avionics systems.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Ensure that newly installed systems and those that have been repaired meet requirements mandated by the Federal Aviation Administration and specifications set by aircraft manufacturers.
• Participate in designing, purchasing, testing and calibrating avionic systems such as computer and electronic communication panels.
• Avionics technicians are responsible for inspecting and testing the complex electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Ensure systems are functioning properly.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

F) Painter

• Works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.
• Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance mandated by the Aviation regulatory authorities and specifications set by aircraft manufacturers and customers.
• Follow standard operating procedures when using tools and equipment such as sanders, hydraulic lift platforms and paint sprayers.
• Properly care for and maintain shop equipment and tools.
• Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required.
• Comply with safety rules and procedures and be alert for unsafe conditions.
• Address unsafe conditions before putting people or property at risk.
• Assist with aircraft movement in hangars.

G) Planner

• Plan and schedule preventive maintenance tasks in aircraft checks to ensure compliance with requirements
• Review all maintenance tasks and preparation of Works Program
• Preparing maintenance work packages for base maintenance checks (C-check / D-check)
• Reviewing job cards after maintenance is completed.
• Develop and provide for material and tooling requirements
• Ensure smooth tasks execution by coordinating with other operational departments
• Implement and track approved modification programmes
• Perform task closure in system.
• In charge of monitoring components being replaced prior for maintenance checks.
• Carry out other duties as assigned

H) CNC Machinist

• Setup, operate and maintain all types of conventional or CNC machines such as Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines in the cell/process.
• Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.
• Perform simple troubleshooting of machines.
• Able to read and interpret blueprints.
• Maintain pertinent records Shop-paper and work in accordance to technical instructions and drawings.
• Work in an orderly manner and keeping work areas, benches and machinery in a tidy and clean condition after used.
• Notify the Supervisor timely for any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.
• Engage in any other activities or responsibilities as requested by the Supervisor.

I) Quality

• Conduct inspections at first piece, in-process, and final stages according to Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI in line with AS9102 requirements.
• Utilize various inspection gages and equipment for dimensional inspections.
• Initiate Quality Notifications (QN) for any non-conformance issues.
• Properly use and maintain gages and inspection equipment.
• Ensure accurate documentation, including stamping of quality paperwork.
• Maintain and enhance 5S standards on workstations and in responsible areas.
• Demonstrate strong communication skills and interact effectively with all levels of staff.
• Adhere to company EH&S policies and Quality Policy.

J) Heat Treatment

• Setup, operate and maintain of Gas Nitride, Atmosphere and Vacuum Hardening processes.
• Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.
• Enter all information on quality documents accurately and timely.
• Maintaining active certified machinist status.
• Read and interpret blueprints.
• Adhere to EH&S & CORE requirements in the work place.
• Work in an orderly fashion keeping work areas, benches and machinery in a tidy and clean condition after used.
• Perform daily housekeeping and sustain 5S implementations.
• Engage in any other activities or responsibilities as requested by the Supervisor.
• Notify the Supervisor of any furnace/machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

Requirements:

• Minimum diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 3 years of working experience in the aviation industry as a full fledge technician, excluding OJT (On Job Training), helper and assistant mechanics.
• Mechanically and electrically trained (Maintenance)
• Exposure on GE CFM Engines, Rolls Royce Trent, Engine Alliance GP, and PW Engines.
• Excellent analytical, interpersonal, communication and problem-solving skills
• Mechanically and electrically trained on Aircraft systems
• Proficiency in the English language (Read, Write, Speak)
• Exposure on commercial aircrafts from Boeing and Airbus, wide and narrow bodied airframes